For small and medium-sized oil production enterprises, efficient operation and maintenance of oil extraction equipment are crucial for ensuring product quality and production continuity. This guide focuses on the operation and maintenance of the fully automatic multi-functional oil press from Penguin Group, aiming to help users optimize production efficiency and reduce production risks.

I. Equipment Startup and Parameter Tuning

Before starting the fully automatic multi-functional oil press, it is necessary to ensure that all components are properly installed and connected. The startup process involves several key steps. First, power on the equipment and check the display panel for any error messages. Then, set the appropriate operating parameters according to the type of oilseed and production requirements. For example, the temperature should be set between 100 - 120°C for most common oilseeds, which can improve the oil extraction rate. Figure 1 shows the control panel of the oil press and how to set the parameters.

II. Monitoring during Pressing and Filtration

During the pressing process, continuous monitoring is essential to ensure the quality of the oil. The pressure and flow rate should be maintained within a certain range. Generally, the pressure should be around 20 - 30 MPa to achieve efficient oil extraction. The filtration process also plays a vital role in removing impurities from the oil. By monitoring the clarity of the filtered oil, operators can determine if the filtration system is working properly. Figure 2 illustrates the filtration system and how to monitor the filtration process.

III. Regular Maintenance and Energy Consumption Management

Regular maintenance is the key to extending the service life of the equipment. This includes regular cleaning of the equipment to prevent the accumulation of oil residues and debris, which can affect the performance of the machine. It is recommended to clean the oil press at least once a week. Additionally, checking and replacing worn parts in a timely manner can reduce the risk of breakdowns. For example, the screw conveyor and the pressing chamber should be inspected for wear every month. Energy consumption management is also an important aspect of equipment maintenance. By optimizing the operating parameters and reducing unnecessary energy consumption, enterprises can save costs. The following table shows the energy consumption data of the oil press under different operating conditions:

IV. Troubleshooting and Prevention

Even with proper maintenance, equipment failures may still occur. Here is a common fault troubleshooting list:

• If the oil output is low, check if the oilseed is properly prepared, the operating parameters are correct, and the equipment is clogged.
• If there is abnormal noise during operation, it may be due to loose parts or worn bearings. Check and tighten the parts or replace the bearings.

For more detailed troubleshooting and prevention measures, please refer to the video link: [Video Link]. Figure 3 shows some common faults and their solutions.

V. Interactive Elements

We understand that users may have various questions during the operation and maintenance of the equipment. Therefore, we have set up an FAQ section and a user message area. If you have any questions, please feel free to leave a message, and our professional team will reply to you as soon as possible. Here are some frequently asked questions:

Q: How often should I replace the filter screen?

A: It depends on the usage and the quality of the oilseed. Generally, it is recommended to replace it every 2 - 3 months.

Q: Can I use the oil press for different types of oilseeds?

A: Yes, the fully automatic multi - functional oil press can be adjusted to process different types of oilseeds by setting the appropriate parameters.

If you want to learn more about the Penguin Group's fully automatic multi - functional oil press and how it can optimize your production process, please click here.